Free Microsoft Outlook Resources & Whitepapers

Outlook 2003 will not send email, error ox800ccc78, 5305.7.0 auth

Outlook 2003 will not send email, error ox800ccc78, 5305.7.0 authentication
required. I receive email ok, just can't send!!!!


Post your answer or comment

comments powered by Disqus

Outlok 2003 will not send emails after running Ccleaner.  I do not receive any error code, it just won't send.

Basically my outlook 2007 will not send emails as HTML format. I have
set this as the default in the "Mail format" tab in tools - options
and check it is formatted this way in the ribbon when I click send.
Unfortunately outlook still send the emails as rich text format with
the winmail.dat attachment. Any ideas as to why this happens?

Basically my outlook 2007 will not send emails as HTML format. I have
set this as the default in the "Mail format" tab in tools -> options
and check it is formatted this way in the ribbon when I click send.
Unfortunately outlook still send the emails as rich text format with
the winmail.dat attachment. Any ideas as to why this happens?

Outlook 2007 will not send email.  When Send Button Clicked, Receive "Operation Failed and Object Not Found" message from Outlook.   Can anyone help with this issue?

Hi,
For the last 4 days, Outlook will not send my messages. It still receives
normally. However, I have to go to my email provider's site (for webmail) in
order to send emails. Of course, there I don't have the messages to reply to
or my Contacts. It's a pain. I spoke with the email/internet provider to make
sure my Incoming (pop3) and Outgoing (smtp) server address info was correct.
It is. However, it still won't send emails. They said it must be something
with Microsoft.

I have Outlook 2003. When I go to Tools, then Email Accounts, and I view my
existing account, I can click "Test Account Settings." This does everything
right except "Find outgoing mail server" (says Failed) and "Send test email
message" (says Failed).

Here is what it says under Errors. "Send test email message: The specified
serve was found, but there was no response from the server. Please verify
that the port and SSL information is correct. To access these settings close
this dialog, then Click More Settings and click on the Advanced tab."

"Find outgoing mail server: Unable to connect to the outgoing mail server
(SMTP). Please verify the server name in the outgoing mail server field. If
that information is correct, close this dialog, click More Settings and
verify the port and SSL information on the Advanced tab."

The server names are correct, as I checked with my provider. What is the
port and SSL? Could these suddenly not be working?

Can anyone please help?! Thank you so much.

Outlook will send and receive email very well following restart of computer,
but once one user logs off and another logs on, it will not send or receive.
When I test account settings, it finds the network connection, the outgoing
and incoming mail server, but will not log onto the incoming mail server, and
the test message fails.

Kathy Bell

when I try to send mail in outlook 2003 I get the following error message.

Task 'Hotmail - Sending' reported error (0x80070057) : 'Could not complete
the operation. One or more parameter values are not valid.'

I can receive mail ok,But I cannot send it.I am using it with hotmail.
Any suggests would be appreciated
Thankyou in advance
Bobby

outlook will not send emails(message: this message has not been sent). Worked
previously and just stopped sending for no apparent reason. I reinstalled the
application Double checked the account settings, scanned for viruses.Any
suggestions

Hello,

I am going absolutely crazy as my Outlook 2003 will receive mail just fine,
but will not send mail right away. It may take anywhere from 5 minutes to 5
hours to send a single piece of mail. I have checked with ISP, and they are
not blocking port 25 etc.

I have formatted the hard drive, reimaged the computer 6 times, loaded just
Win XP home and Office 2003 (no firewall, AV etc, except the Windows built
in) and am having the same results. I do not know where to turn to for help.

I am willing to try anything, desperately looking for help.

Looking for a miracle helper....

TIA

Velani

outlook will not send emails(message: this message has not been sent). Worked
previously and just stopped sending for no apparent reason. I reinstalled the
application Double checked the account settings, scanned for viruses.Any
suggestions

when I try to send mail in outlook 2003 I get the following error message.

Task 'Hotmail - Sending' reported error (0x80070057) : 'Could not complete
the operation. One or more parameter values are not valid.'

I can receive mail ok,But I cannot send it.I am using it with hotmail.
Any suggests would be appreciated
Thankyou in advance
Bobby

"Danny" wrote:

> I am not using any commandline switches with outlook. I am using McAfee
> virus, I am beginning to suspect that. I am running Offince 2003 on XP Pro on
> a high speed isp using pop3 mail server. I want to leave my Outlook on and
> receice mail as I get it. Currently, I can not receive mail unless I hit
> 'send/receive'. Any ideas?

I am having this problem with Outlook 2003 with Windows XP. When I test my
email accounts (3 in all) with my ISP server , I get the nice green check
marks that the send and receive to POP and SMTP are OK and a test message is
sent to my ISP . ....but Outlook 2003 will not send or receive an email. The
emails just sit there and when I hit send/receive nothing happens and no
error messages. I know the test email was sent Ok because I see it when I
check on a different computer.

I have tried everything including reinstallng Outlook 2003 (Office 2003),
disabling my Norton 360, running in safe mode, changing every setting
possible, and still messages sit in the outbox. Before all the problems, I
did have to do a repair on Windows XP because of a boot up problem with
Windows.

About ready to give up on Outlook 2003 and just starting using my ISP
provider (Cox) for getting emails...because that is where I can actually see
the test messges were sent.

Any suggestions?

I have performed all the suggestions on the Microsoft website.
I have paid for a Microsoft Technician to troubleshoot Outlook 2003 regarding Outlook not retaining my password
I have contacted Dell and the Dell Technician uninstalled "Office" and reinstalled "Office"
I have contacted our ISP and they have verified all email settings are correct.
We have created new accounts, new pst. file, Microsoft Tech made changes to registry.

Still, Outlook 2003 will not remember (or retain) my password.

Outlook Express works great and does not ask me for a password.
Thunderbird Works great, no problems

Outlook 2003 has been loaded on my PC for over 1 year with no problems --- then, Nov. 15th I began having "pop- up" asking me for my password.

There has to be someone "out there" that has a solution. The Microsoft Tech told my I would have to wait until Microsoft comes out with a "Hot Patch".

Please give your thoughts.

Thanks,
TRSmith

Outlook 2003 will not load. I get an error message with a big X stating,
"Cannot start Microsoft Office Outlook. Unable to open the Outlook Window.
The set of folders could not be opened."

Running XP on a Dell Comuter. All other Office Programs work properly. I
have reinstalled several times with the same result. Please tell me what I
need to do.

I have one address that was working earlier today, but Outlook will not send
from it now. It WILL send test messages and says the set-up is fine.

Ideas?

All my other addresses, one from the same servers, work fine.

Outlook will send 'reply' and 'forward' messages; but, will not send 'new'
messages'. Here are the log entries when trying to send through mail server
'gvec.net':

2008.11.06 08:45:36 SMTP (mail.gvec.net): Finding host
2008.11.06 08:45:36 SMTP (mail.gvec.net): Connected to host
2008.11.06 08:45:36 SMTP (mail.gvec.net): 220 gvec.net modusMail ESMTP
Receiver Version 4.5.654.13 Ready
2008.11.06 08:45:36 SMTP (mail.gvec.net): [tx] EHLO D3S4Y6G12008
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-gvec.net
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-SIZE 0
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-ETRN
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-STARTTLS
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-ENHANCEDSTATUSCODES
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-X-IMS 5 -1
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-DSN
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-VRFY
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-AUTH LOGIN NTLM SCRAM-MD5
CRAM-MD5
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250-AUTH=LOGIN
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250 8BITMIME
2008.11.06 08:45:36 SMTP (mail.gvec.net): Authorized to host
2008.11.06 08:45:36 SMTP (mail.gvec.net): Connected to host
2008.11.06 08:45:36 SMTP (mail.gvec.net): [tx] MAIL FROM:
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250 2.0.0 ***** OK
2008.11.06 08:45:36 SMTP (mail.gvec.net): [tx] RCPT TO:
2008.11.06 08:45:36 SMTP (mail.gvec.net): 250 2.0.0 ***** OK
2008.11.06 08:45:36 SMTP (mail.gvec.net): [tx] DATA
2008.11.06 08:45:36 SMTP (mail.gvec.net): 354 Ready for data
2008.11.06 08:45:36 SMTP (mail.gvec.net): [tx]
..
2008.11.06 08:45:37 SMTP (mail.gvec.net): 250 2.0.0 Message received OK
[id=B0624161421@gvecmail.gvec.net]
2008.11.06 08:45:37 SMTP (mail.gvec.net): End execution
2008.11.06 08:45:37 pop.texas.net: ReportStatus: RSF_COMPLETED, hr =
0x00000000
2008.11.06 08:45:37 pop.texas.net: Synch operation completed

Thanks,

Gil Merkle

When i add a personal signature outlook will not send. I rmove the
signature and outlook works fine, I have removed and reinstalled.
Each time I add a signature if appears as if the message was sent
(including a receipt that the message was recieved) but it never
arrives. Anyone have any ideas??????

When i add a personal signature outlook will not send. I rmove the
signature and outlook works fine, I have removed and reinstalled.
Each time I add a signature if appears as if the message was sent
(including a receipt that the message was recieved) but it never
arrives. Anyone have any ideas??????

Hello, I just got a new Windows 7 computer and after installing Office XP(SP3), Outlook will receive messages but will not send any messages. I keep getting this message - 553 sorry, that domain isn't allowed to be relayed thru this MTA (#5.7.1). I have Outlook configured to "my outgoing server requires authentication", and checked the box below that says "log onto incoming server before sending". Any suggestions?

Even though I have the box, "send immediately when connected" check Outlook
2003 WILL NOT send receive without prompting.

I've searched here on this topic and found others having this same issue but
no resolution has been found yet, is this correct.

This just began after I had a new harddrive and software installed, but all
my data was restored.

For some reason my Outlook 2003 will not close when I exit. The program
disappears but the Outlook Icon remains open in the sys tray. I cannot
figure out why this has happened or how to fix it.

Does anyone know why the program is doing this and how to fix it?

Recently Outlook 2003 won't send emails to anyone who has a gmail.com or yahoo.com address.  Emails to other types of addresses are still going through.  Why aren't these emails being sent?

Hi All,
I have two accounts setup under outlook 2003 which i just started using
on a brand new dell computer. My sbcglobal Home account works fine but
Work account will not send emails. I receive this error message:
"Task 'Work - Sending' reported error (0x8004210B) : 'The operation
timed out waiting for a response from the sending (SMTP) server. If you
continue to receive this message, contact your server administrator or
Internet service provider (ISP).', "when trying to check my email.

Also, if I use the test settings buttons under the account setup
screen, I get this message:
"Send test e-mail message: The specified server was found, but there
was no response from the server. Please verify that the port and SSL
information is correct. To access these setting close this dialog,
then click More Settings and click on the Advanced tab."

I have tried temporarily disabling my virus software which is pc-cillin
internet security 14 if that helps and still the same issues. These
same settings worked with outlook 2000 and outlook express and now I
cannot get it to work. I assure I have tried all the standard fixes
like uninstalling and reinstalling...I even went to a working station
at the office and looked at the seetings there and mine are identical
in every way. Anyone know how to solve this issue?

Thanks!
Tony

Hi All,
I have two accounts setup under outlook 2003 which i just started using
on a brand new dell computer. My sbcglobal Home account works fine but
Work account will not send emails. I receive this error message:
"Task 'Work - Sending' reported error (0x8004210B) : 'The operation
timed out waiting for a response from the sending (SMTP) server. If you
continue to receive this message, contact your server administrator or
Internet service provider (ISP).', "when trying to check my email.

Also, if I use the test settings buttons under the account setup
screen, I get this message:
"Send test e-mail message: The specified server was found, but there
was no response from the server. Please verify that the port and SSL
information is correct. To access these setting close this dialog,
then click More Settings and click on the Advanced tab."

I have tried temporarily disabling my virus software which is pc-cillin
internet security 14 if that helps and still the same issues. These
same settings worked with outlook 2000 and outlook express and now I
cannot get it to work. I assure I have tried all the standard fixes
like uninstalling and reinstalling...I even went to a working station
at the office and looked at the seetings there and mine are identical
in every way. Anyone know how to solve this issue?

Thanks!
Tony


Not finding an answer? Try a Google search.