Error code: The operation cannot be performed because the object has been deleted.



I have Outlook 2007 and everything worked fine until last night when I started receiving an error everytime the "send" button is pushed to send an email.  The error message reads:

"The operation cannot be performed because the object has been deleted."  

No new software was installed and as far as I am aware no changes were made to the system to cause this. 

I installed a hotfix that I found on the MS website that should have addressed the issued but it didn't. 

I do not have a software disk since I downloaded the Office Enterprise version from my college website when I purchased it. 

Someone please help me fix the problem so I can send emails again.

Thank you,


Sponsored Links:



Unable to use Send to: Mail Recipient (for Review) for any office application
Using Outlook 2003 on Exchange Server. Get error message "operation cannot
be performed because object has been deleted" Happens to some users and not
others.Any suggestions?




Hi all,

Need help from you guys:

My manager had to go to US for a week  and so we moved his mailbox to a server in US.

He returned back and we had to move his mailbox to India server.

We tried it and got the following error message:

The Operation cannot be performed because this mailbox was already reconnected to an existing user.
ID no. c1034ad6
Exchange System Manager

I searched internet and got options but not sure which to try:

http://support.microsoft.com/kb/930363
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=109992&SiteID=1
http://ukstokes.com/blog/2006/08/07/how-to-purge-an-orphaned-mailbox/

I dont want to go wrong as its my Manager's mailbox.

The mailbox was moved from Exch 2003 to Exch 2003.
First it was moved from India(A) server to US(A) server.

We first scheduled the move back to India(A) and got the above error.

We see the entry of the mailbox with a RED X mark on the India Server ,but the mailbox is still on the US(A) server.

After checking options, when I tried to purge it gives another error stating:

the operation cannot be performed because this mailbox was already reconnected to an existing user
 
My Manager is presently accessing the mailbox from the US server.

My confusion is if I try the above links and remove the Exchange Attributes , is it going to cause any problem.

I need to move his ASAP

Please suggest a best possible way to resolve this issue.




hi!

I've customized Contact form for OL-2003.I'm calling a procedure
Savedata
in Item_Write() in which I need to retiieve userproperties of
contactitem
and save them to database.Code is
dim c as outlook.contactitem

Set c = ActiveInspector.CurrentItem
---retrieving some userproperties of c in local variables
c.save ---to get entryID As I need to store it in database
varEntryId=c.EntryID
---saving userproperties of c and EntryID in database

for the statement c.save ,sometimes I get the error stating that
"The operation cannot be performed because the message has been
changed"
What is the reason behind this error?how to fix it. I also get the
error
"The item could not be saved because it has been changed by another
user or
in another window.Do you want to make a copy in the default folder for
the
item?" Are these two errors interrelated? Why do they occur normally?

Thanks in advance!




hi!

I've customized Contact form for OL-2003.I'm calling a procedure
Savedata
in Item_Write() in which I need to retiieve userproperties of
contactitem
and save them to database.Code is
dim c as outlook.contactitem

Set c = ActiveInspector.CurrentItem
---retrieving some userproperties of c in local variables
c.save ---to get entryID As I need to store it in database
varEntryId=c.EntryID
---saving userproperties of c and EntryID in database

for the statement c.save ,sometimes I get the error stating that
"The operation cannot be performed because the message has been
changed"
What is the reason behind this error?how to fix it. I also get the
error
"The item could not be saved because it has been changed by another
user or
in another window.Do you want to make a copy in the default folder for
the
item?" Are these two errors interrelated? Why do they occur normally?

Thanks in advance!




I'm trying to implement my own "Save and Close" button on an
appointment form. In my button-click handler, I am calling
_thisAppointment.Save(). The item does get saved, but I also get an
exception

"The operation cannot be performed because the message has been
changed."

The error code is -832306935. Does anyone know what will cause this
exception? I'm able to save the item by pressing ctrl-S with no
errors.

Thanks,
John




I'm trying to implement my own "Save and Close" button on an
appointment form. In my button-click handler, I am calling
_thisAppointment.Save(). The item does get saved, but I also get an
exception

"The operation cannot be performed because the message has been
changed."

The error code is -832306935. Does anyone know what will cause this
exception? I'm able to save the item by pressing ctrl-S with no
errors.

Thanks,
John




I'm creating a spreadsheet application to write appointments to
Outlook. It writes the first appoitnment in the sheet OK. When it goes
to .Save the second down I get the "operation cannot be performed
because the message has been changed" error

Any ideas how I fix.

Thanks in advance. Here's my code

Sub SetAppt()

'// Initial Setup //
Dim olApp As Outlook.Application
Dim olApt As AppointmentItem

Set olApp = New Outlook.Application
Set olApt = olApp.CreateItem(olAppointmentItem)

Dim xLabel As Integer
qTitle = "ExcelToOutlookTaskSynch"

'// If any, how many records do we need to process? //
qrow = [B20].End(xlDown).Row
If qrow = 65536 Then Exit Sub 'No records

'// Loop through records //
For i = 21 To qrow
'// Pick up and translate variables //
qID = Cells(i, 1)
qTask = Cells(i, 2)
qDesc = Cells(i, 3)
qStartDay = Cells(i, 4)
qStartTime = Cells(i, 5)
qEndDay = Cells(i, 6)
qEndTime = Cells(i, 7)
qLabel = Cells(i, 8)
qShowAs = Cells(i, 9)
'// Translate qShowAs //
If qShowAs = "Busy" Then qShowAs = Outlook.OlBusyStatus.olBusy
If qShowAs = "Free" Then qShowAs = Outlook.OlBusyStatus.olFree
If qShowAs = "Tentative" Then qShowAs =
Outlook.OlBusyStatus.olTentative
If qShowAs = "Out of office" Then qShowAs =
Outlook.OlBusyStatus.olOutOfOffice
qLocation = Cells(i, 10)
qResource = Cells(i, 11)
qTo = Cells(i, 12)
qWaitTime = Cells(i, 13)
qSentTo = Cells(i, 14)
'// Pick up and translate variables //

'// Validation //
'// qID //
If Not IsNumeric(qID) Or qID 0 Then
MsgBox "qID: " & qID & " not a Valid Positive Integer.
Please correct.", vbCritical, qTitle
Exit Sub
End If
' // qTask //
If qTask = "" Then
MsgBox "Please enter a Task for appointment: " & qID,
vbCritical, qTitle
Exit Sub
End If
'// qStartDay //
If Not IsDate(qStartDay) Then
MsgBox "Please enter a valid start date for appointment: "
& qID, vbCritical, qTitle
Exit Sub
End If
'// qStartTime //
If qStartTime 1 Or qStartTime 0 Then
MsgBox "Please enter a valid start time for appointment: "
& qID, vbCritical, qTitle
Exit Sub
End If
'// qEndDay //
If Not IsDate(qEndDay) Then
MsgBox "Please enter a valid end date for appointment: " &
qID, vbCritical, qTitle
Exit Sub
End If
'// qEndTime //
If qEndTime 1 Or qEndTime 0 Then
MsgBox "Please enter a valid end time for appointment: " &
qID, vbCritical, qTitle
Exit Sub
End If
'// qLabel //
If qLabel = "" Then
MsgBox "Please enter a valid Label from the drop down box
for appointment: " & qID, vbCritical, qTitle
Exit Sub
End If
'// qShowAs //
If qShowAs = "" Then
MsgBox "Please enter a valid 'Show As' category from the
drop down box for appointment: " & qID, vbCritical, qTitle
Exit Sub
End If
'// Validation //

'// Determine whether or not to transmit to Outlook and write//
If qSentTo "Y" Then
'// Determine whether or not to postpone the current item //
If qWaitTime 0 Then
'// Records time to wait until //
newHour = Hour(Now())
newMinute = Minute(Now()) + qWaitTime
newSecond = Second(Now())
waitTime = TimeSerial(newHour, newMinute, newSecond)
Application.StatusBar = "Outlook Post Pending for ID: " &
qID & " until " & waitTime
Application.Wait waitTime
Application.StatusBar = ""
End If
With olApt
.Start = qStartDay + qStartTime
.End = qEndDay + qEndTime
.Subject = qTask
.Location = qLocation
.Resources = qResource
.Body = qDesc
.BusyStatus = qShowAs
.ReminderSet = True
.OptionalAttendees = qTo
'// Set Labels with SetApptColorLabel Procedure //
If qLabel = "None" Then xLabel = 0
If qLabel = "Important" Then xLabel = 1
If qLabel = "Business" Then xLabel = 2
If qLabel = "Personal" Then xLabel = 3
If qLabel = "Vacation" Then xLabel = 4
If qLabel = "Must Attend" Then xLabel = 5
If qLabel = "Travel Required" Then xLabel = 6
If qLabel = "Needs Preparation" Then xLabel = 7
If qLabel = "Birthday" Then xLabel = 8
If qLabel = "Anniversary" Then xLabel = 9
If qLabel = "Phone Call" Then xLabel = 10
Call SetApptColorLabel(olApt, xLabel)
.Save
End With
Application.StatusBar = ""
Cells(i, 14) = "Y" '// Set Sent Flag to Y //
Cells(i, 15) = qStartDay + qStartTime & "/" & qEndDay +
qEndTime & "/" & qTask & "/" & qShowAs '// Sets Unique ID //
End If
'// Determine whether or not to transmit to Outlook and
write//
Next

Set olApt = Nothing
Set olApp = Nothing

End Sub




Hi all,

I encountered the following error message while try to move a contact from
one folder to another folder.

- Cannot move the items. The operation cannot be performed because the
message has been changed.

For your information, i add event handler for Contact_ItemRemove event. The
error will occur when i try to update UserProperties for the particular
contact.

I am using VSTO SE and Outlook 2007.

thanks!




Hi all,

I encountered the following error message while try to move a contact from
one folder to another folder.

-> Cannot move the items. The operation cannot be performed because the
message has been changed.

For your information, i add event handler for Contact_ItemRemove event. The
error will occur when i try to update UserProperties for the particular
contact.

I am using VSTO SE and Outlook 2007.

thanks!




A number of our customers have had this error message
"The function cannot be performed because the message has been changed"

This error occurs when a user attempts to accept a meeting from another
calendar that they have delegate access to. The meetings are new meetings and
opened for the first time.

The user is on XP, Office 2003 on spk2




I am having increased issues when accepting
calendar updates from another user, who is the "owner" of the calendar
postings. When I go to accept the calendar update, I get the message
"the function cannot be performed because the message has been changed."
The only way to accept the update is to close out of Outlook, re-open
Outlook, and then the action of accepting the calendar update works.
Very frustrating and mystifying. Any ideas on a fix?

I am using Outlook 2003 SP3 & MS Exchange 2007

Thank you in advance




I have 3-4 users who cannot accect new meeting requests in Outlook
2003 SP2. They get the message "The function cannot be performed
because the message has been changed". If they close the request and
reopen it, they can accept the request. Anyone have any ideas?




I am having increased issues when accepting
calendar updates from another user, who is the "owner" of the calendar
postings. When I go to accept the calendar update, I get the message
"the function cannot be performed because the message has been changed."
The only way to accept the update is to close out of Outlook, re-open
Outlook, and then the action of accepting the calendar update works.
Very frustrating and mystifying. Any ideas on a fix?

I am using Outlook 2003 SP3 & MS Exchange 2007

Thank you in advance




I created a new contact list and used it to do a mailmerge. I then updated
the list and tried to export it to do another mailmerge but it threw up an
error, so I deleted the previous export file and it then worked fine.
However, when I now try open the list it throws up the error "the operation
cannot be performed because the object has been deleted" and then
automatically closes Outlook and then opens it again. I deleted the export
file but it had no effect. Any ideas? I need to use the list again.




We changed severs over the weekend. From Saturday morning until; noon today
we successfully were sending/receiving via MS Outlook 2007 via the new
server's @ringdesigner.com's e-mail, as well as working well for our personal
account @comcast.net. Outlook 2007 was running great.

Then around mid-day today, every time Outlook starts a send/receive, Outlook
will not send/recieve, but we get the weirdest error (immediately) that says
something like (0x8004010A) "Operation cannot be performed because the
object has been deleted?????" You can see the exact error text via two
screen captures we posted at this URL address:

http://www.ringdesigner.com/4-Verio-Web-Hosting-Labor-Day-We ekend.htm

We ran Microsoft Office Diagnostics from Outlook 2007's Help, with no issues
or problems found. Those results posted on the URL listed above as well.

Really need our Outlook.

Any ideas? Thank you!

Greg Gates
Co founder
www.ringdesigner.com





Hi, this message appears when i try to assign a category in the standard mail view.

on the second attempt, the operation is executed normally.

is it sign of further problem, or a bug?




Well this has us tearing our hair out. The users are not happy one
bit.

It's neither :

http://support.microsoft.com/kb/935411
or
http://support.microsoft.com/kb/920061

Cleanfreebusy and Cleanreminders switches have been run. No rules
are
set up.

- Delgate creates meeting on behalf
- Attendee accepts
- Delegate changes a detail, either time or adds an attendee
- This message is displayed when trying to Send Update.
- "The item could not be saved because it has been changed by
another person. Do you want to save a copy in your default Calendar
folder? If you click Yes, you need to copy and paste your changes
from
the "copy of" item in your default folder into a new update for this
meeting."

Occasionally, the attendee gets a message when trying to accept
either
the initial message, or the update : "The function cannot be
performed
because the message has been changed."

Thansk in advance for any constructive help!

Andy





Hi there... TIA in advance for helping me to resolve the above error message.

Yesterday my computer blue screened while I was in one of my Outlook user profiles. I was able to repair it using advice from this forum on repairing .pst files. I was able to receive messages in a recovery folder name Lost and Found, in a subfolder named 8082 or something like that.

I noticed that my Inbox folder was missing, so I created a new folder and copied the messages in the recovered folder to it, and deleted the Lost and Found folder. Now I cannot receive messages in the problem profile. Other profiles work fine.

Suggestions on how to fix this?

 

sherry




Hi Everyone,

I deleted a user from AD. When I look at my mailstore, I see the deleted user mailbox has a red 'x' on it. When
I try to purge the mailbox, I get an Error message:

(c1038af9) "The operation
cannot be performed because the mailbox was already
reconnected to another existing user."

Any advise that can help me resolve this issue would be deeply appreciated.

Thanks
Adesh